Gouda Geo-Equipment B.V.
Satellietbaan 8
2181 MH Hillegom
The Netherlands
Satellietbaan 8
2181 MH Hillegom
The Netherlands
Downloads
GeoDriller CR-4200 Crawler Mounted Drill Rig
The GeoDriller drill rigs are extremely versatile and powerful for their size and offer flexibility, reliability, productivity and safety at an affordable price.The drill rigs are suitable for geotechnical, environmental, geothermal, water well drilling applications and coring for mineral research. The compact design allows them to operate in areas with limited or restricted access.
Multiple configurations and options are available, meeting the client’s needs. The rigs can e.g. be fitted with a rotary head featuring the torque and RPM to suit your drilling method and application. The swing-out control arm provides the operator with comfort and convenience while drilling.
The crawler mounted GeoDriller CR-4200 is able to drill a 6" bore over 140 meter deep and a HQ (OD = 96 mm) bore up to 262 meter deep.
Diesel Engine
- Brand and type: Deutz TD 2011 L4 W, watercooled
- Power output: 68 kW / 91 HP
- Fuel: diesel
- Exhaust gas emission: EU stage IIIB / US EPA Tier 3
- Sound insulating canopy
- Capacity of fuel tank: 95 liter
Hydraulics
- Drilling controls on a pivoting arm
- Rexroth load-sensing hydraulic pump
- Danfoss proportional hydraulic valves
- Hydraulic levelling jacks: 4 nr.
- Mast raise/lower cylinder
- Slide cylinders
- Capacity of hydraulic tank: 200 liter
- Oil cooler
Crawler Undercarriage
- Width of track shoes: 300 mm
- Effective length of tracks: 1755 mm
- Material of track shoes: rubber or steel
- Driving speed: 0 to 1.5 km/h
- 2 different driving speeds (low torque / high speed vs. high torque / low speed)
Drill Mast
- Total height: standard 4600 mm / optional 5600 mm
- Mast feed stroke: standard 2700 mm / optional 3700 mm
- Max. push down feed force: 4500 daN
- Max. pull up retract force: 4500 daN
- Mast sliding: 500 mm
Rotary Head
- Direct/reverse circulation
- Passage through rotary head: 2 inch (50 mm), but the TM2C3 and TM2C4 have a 1 1/2 inch (38 mm) passage
- Model TM4: 6100 Nm torque, 2 gears, speed: 0 - 130 RPM
- Model TM4R: 6880 Nm torque, 3 gears, speed: 0 - 500 RPM
- Model TM2C3: 4200 Nm torque, 4 gears, speed: 0 - 400 RPM
- Model TM2C4: 6640 Nm torque, 4 gears, speed: 0 - 286 RPM
- Model TM4RI: 5260 Nm torque, 4 gears, speed: 0 - 650 RPM
Double Hydraulic Break-out Clamps
- Model MS-225: clamping range from 50 to 225 mm, clamping force: 108 kN, breaking torque: 23500 Nm
Hydraulic Winch
- Model AR-3: max. pulling force: 1350 daN, drum storage capacity: 15 meter, rope speed: 53 m/min
- Model AR-4: max. pulling force: 2000 daN, drum storage capacity: 15 meter, rope speed: 34 m/min
Weight and Dimensions
- Dimensions (transport mode): 567 x 147 x 234 cm
- Dimensions (operating mode): 364 x 147 x 567/743 cm
- Weight (without accessories): 4500 kg
- Ground pressure (without accessories): 0.39 kg/cm2
Remote Control
- Manufacturer: Autec Safety Remote Control
- Impact resistant housing
- Ingress protection degree IP65
- Rechargeable lithium-ion battery
Optional Extras
- Polyurethane track shoes
- Pivoting safety gate system
- Extension of the drill mast by 1.3 meter
- Casing extractor 9400 kg
- Water pump
- Foam/mist pump
- Screw pump
- Airline/venturi lubricator
- Hydraulic hammer
- SPT penetrometer
- Storage box for drill pipes
- Spray-painting in company colour(s) of client
- Mast mounted flood lights
- Left and right tilting of the drill mast: +/- 90 degrees
- Break-out cylinder
- Hydraulic rotopercussion drifter head
Instruction & Commissioning
Instruction and on-site commissioning of the GeoDriller drill rig. Gouda-Geo sends over an experienced foreman driller to the client's jobsite to commission the equipment and to train the personnel on how to use the equipment by working together with them.
Documents
- CE Declaration of Conformity, as required by EC Directive 2006/42/EG
- Operating and service manual in Dutch, English, Italian (other languages possible at extra costs)
- Certificate of Origin (legalisation is possible at extra costs)
- Exhaustive spare parts manual
- Exploded drawings for maintenance and repair
- Hydraulic scheme
- Electric scheme
Safety & International Standards
The GeoDriller drill rig is designed and built in accordance with national and international standards and regulations. It complies with the provisions of the EC Directive 2006/42/EG and is provided with CE marking certifying that the rig has met EU consumer safety, health or environmental requirements.