Gouda Geo-Equipment B.V.
Satellietbaan 8
2181 MH Hillegom
The Netherlands
Satellietbaan 8
2181 MH Hillegom
The Netherlands
GeoDriller CR-11000 Crawler Mounted Drill Rig
The GeoDriller drill rigs are extremely versatile and powerful for their size and offer flexibility, reliability, productivity and safety at an affordable price.The drill rigs are suitable for geotechnical, environmental, geothermal, water well drilling applications and coring for mineral research. The compact design allows them to operate in areas with limited or restricted access.
Multiple configurations and options are available, meeting the client’s needs. The rigs can e.g. be fitted with a rotary head featuring the torque and RPM to suit your drilling method and application. The swing-out control arm provides the operator with comfort and convenience while drilling.
The crawler mounted GeoDriller CR-11000 is able to drill a 9"7/8 bore over 300 meter deep and a HQ (OD = 96 mm) bore up to 700 meter deep.
Diesel Engine
- Brand and type: Deutz TCD 6.1 L6, watercooled
- Power output: 180 kW / 241 HP
- Fuel: diesel
- Exhaust gas emission: EU Stage IIIB & IV / US EPA Tier 4 interim & Tier 4
- Sound insulating canopy
- Capacity of fuel tank: 130 liter
Hydraulics
- Drilling controls on a pivoting arm
- Rexroth load-sensing hydraulic pump
- Danfoss proportional hydraulic valves
- Hydraulic levelling jacks: 4 nr.
- Mast raise/lower cylinder
- Slide cylinders
- Capacity of hydraulic tank: 400 liter
- Oil cooler
Crawler Undercarriage
- Width of track shoes: 400 mm
- Effective length of tracks: 2450 mm
- Material of track shoes: steel
- Driving speed: 0 to 1.5 km/h
- 2 different driving speeds (low torque / high speed vs. high torque / low speed)
Drill Mast
- Total height:9750 mm
- Mast feed stroke:6700 mm
- Max. push down feed force: standard 9000 daN / optional 12000 daN
- Max. pull up retract force: standard 9000 daN / optional 12000 daN
- Mast sliding: 1000 mm
Rotary Head
- Direct/reverse circulation
- Passage through rotary head: 2 1/2 inch (63 mm)
- Model TM9: 11000 Nm torque, variable displacement, speed: 0 - 130 RPM
- Model TM9R: 11120 Nm torque, 3 gears, speed: 0 - 5300 RPM
Double Hydraulic Break-out Clamps
- Model MS-300: clamping range from 50 to 305 mm, clamping force: 170 kN, breaking torque: 23500 Nm
- Model MS-360: clamping range from 76 to 360 mm, clamping force: 170 kN, breaking torque: 23500 Nm
Hydraulic Winch
- Model AR-6: max. pulling force: 3100 daN, drum storage capacity: 30 meter, rope speed: 40 m/min
- Model Wire-Line: max. pulling force: 600 daN, drum storage capacity: 302 meter, rope speed: 107 m/min
Weight and Dimensions
- Dimensions (transport mode): 595 x 204 x 260 cm
- Dimensions (operating mode): 530 x 204 x 848 cm
- Weight (without accessories): 9000 kg
- Ground pressure (without accessories): 0.43 kg/cm2
Remote Control
- Manufacturer: Autec Safety Remote Control
- Impact resistant housing
- Ingress protection degree IP65
- Rechargeable lithium-ion battery
Optional Extras
- Polyurethane track shoes
- Automatic drill pipes changer
- Pivoting safety gate system
- Extension of the drill mast
- Casing extractor 9400 kg
- Air compressor
- Centrifugal pump
- Mud pump
- Water pump
- Foam/mist pump
- Screw pump
- Airline/venturi lubricator
- Hydraulic hammer
- SPT penetrometer
- Storage box for drill pipes
- Pipe loader arm
- Spray-painting in company colour(s) of client
- Mast mounted flood lights
- Break-out cylinder
- Hydraulic rotopercussion drifter head
Instruction & Commissioning
Instruction and on-site commissioning of the GeoDriller drill rig. Gouda-Geo sends over an experienced foreman driller to the client's jobsite to commission the equipment and to train the personnel on how to use the equipment by working together with them.
Documents
- CE Declaration of Conformity, as required by EC Directive 2006/42/EG
- Operating and service manual in Dutch, English, Italian (other languages possible at extra costs)
- Certificate of Origin (legalisation is possible at extra costs)
- Exhaustive spare parts manual
- Exploded drawings for maintenance and repair
- Hydraulic scheme
- Electric scheme
Safety & International Standards
The GeoDriller drill rig is designed and built in accordance with national and international standards and regulations. It complies with the provisions of the EC Directive 2006/42/EG and is provided with CE marking certifying that the rig has met EU consumer safety, health or environmental requirements.